Oakworks ProLuxe Convertible User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
1
WARNINGS & CAUTIONS
SYMBOL ID & WARNINGS
SYMBOL IDENTIFICATION - WARNINGS & CAUTIONS
SYMBOL IDENTIFICATION
This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an electrical
shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective
Earth (Ground) Terminal.
This symbol when used in this manual or on product labels, warns that during transport
there should be no stacking of containers.
This symbol, when used in this manual or on product labels, indicates that the product
should be protected from moisture. The humidity specifications for Transport &
Storage are listed in the back of this manual.
This symbol, when used in this manual or on product labels, indicates that information
is given regarding the recommended temperature limits during transport and storing.
This symbol, when used in this manual or on product labels, indicates the date of
manufacture of the device.
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current
(DC).
This symbol, when used in this manual or on product labels, indicates that
instructional information is included. It should be read carefully and completely .
~
----
Improper use of this device can cause injury. Be sure to read all operating instructions
prior to use.
Weight limit is defined by the portable table used with this product. (If the portable
table has a weight limit of 450 lbs, then the system is 450 lbs) up to a maximum of 550 lbs.
Be certain that the table is completely lowered prior to discharging an ambulatory
patient. The patient may lose balance and fall.
Electrical Shock Hazard. The power supply/control module is located below the base
of the table. No user serviceable parts are inside. Refer servicing to qualified personnel.
Before doing any work on the unit or cleaning with any liquid cleaner, unplug wall con-
nector prior to contact with any cables connected to the power supply.
Plug table into an outlet that is surge protected to a level of 750J or higher.
Failure to do this may void all or part of the warranty.
WARNING
CAUTION
WARNING
CAUTION
Page view 3
1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments