Oakworks QuickLock Face Rest User Manual download pdf

Instructions

QuickLock

™

Face Rest

Phone: 717-235-6807

FAX: 717-235-6798

www.oakworks.com

* U.S. Patent No. 5,177,823

To change the cams

from right to left-

handed, flip the face

rest over and replace

the pad so that it is

again on the top side

of the platform.

To vary the height and

angle of the face rest,

loosen the cam locks,

adjust and lock the

cams.

Fig. 2

Fig. 3

Fig. 1

Fig. 4

Instructions for Adjusting the Face Rest:

Always Adjust the Face Rest

with Your Client on the Table or Chair

1) Starting with the face rest in a flat position, have your client lie face down

on the face rest. (Fig. 1)

2) Ask your client to support the face rest with two hands by holding onto

it at the velcro on the sides of the U-shaped tube after you have unlocked

the cam locks. (Fig. 2)

3) Have your client pull the face rest towards him/her, raising the chin and

lowering the forehead until he/she is comfortable on the pad; cheeks fully

supported and neck comfortably flexed. (Fig. 3)

4) When the face rest is in a position that meets your treatment requirements

and your client’s optimal comfort, lock the cam locks. (Fig. 4) To prevent

wear, be sure the teeth on the cams are not head to head.

Part no. MMINML0004 rev. 10.17.12

Tips for Great Positioning:

1) To use the face rest with your clients supine, rotate the face rest pad so that

the thick part of the pad supports your client’s cervical region. Adjusting the

height and angle of the face rest gives your clients perfectly comfortable

support. (Fig. 5)

2). The face pad is flexible so that you can bring the open ends together or

spread them apart to achieve the most comfortable support for any size

face. (Fig. 6) To avoid your client’ chin from hitting the spacebar, make

sure the pad is narrow enough to support their whole face.

3) For appropriate cervical flexion, use the cam locks to adjust the downward

angle of the face rest, making sure that the surface of the face rest pad at

the chin is not lower than the surface of the table. (Fig. 7)

4) The face rest pad is attached with velcro so that you can adjust the distance

of the face rest from the table. You may require greater distance for larger

clients or when an arm rest is used; less distance for more petite clients

or when arms are resting on the table. You can also adjust the position of the

pad to avoid having the spacebar near the client’s chin.

Fig.6

Fig. 5

Fig. 7

1 2

Summary of Contents

Page 1 - QuickLock

Instructions QuickLock™ Face RestPhone: 717-235-6807FAX: 717-235-6798www.oakworks.com* U.S. Patent No. 5,177,823To change the cams from right to left-

Page 2 - QuickLock™ Face Rest:

Instructions for Attaching the Stationary Lift Plate*: (Stationary Tables Only)For Stationary Table owners, Oakworks® offers a Lift Plate that attac

Comments to this Manuals

No comments

Oakworks QuickLock Face Rest User Manual

Browse online or download User Manual for Health and hygiene Oakworks QuickLock Face Rest. Oakworks QuickLock Face Rest User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Health and hygiene Oakworks QuickLock Face Rest